Dust collector
Filter cartridge pulse dust collector
01
Operating principle
This equipment consists of up cylinder(The net gas chamber), middle cylinder(mixing chamber) and the under vertebral body. The air with dust get into cylinder from air inlet, due to the sudden expansion of the volume and flow rate of air flow suddenly reduced, the bigger particles fall into the under vertebral body from the air flow with dust under the gravity force, the smaller particles adsorbedin the outer wall of the filters due to the effects of sieving, collision, diffusion,electrostatic of the filters, the air dusted through bag venturi tube to outside from the outlet of the up cylinder. when the particles of the outer wall of dust increase, so dust resistance increasing, to reduce the resistance, signaled by the Pulse controller to open the electromagnetic pulse valve, compressed air within the package by the respective injection holes injected into the injection tube on the corresponding venturi (primary air), and when the high speed air flow through the venturi tube, lead multiple primary air ambient air(Second air) to the filters, lead to the filters expand rapidly of the moment, as the shock effect of the reverse pulse air quickly disappeared, sharp contraction of the filters, in this case, most of the dust on the filters be clean, fall in to the under vertebral body and discharged.
02
Performance characteristics
1. As the installation of this equipment cartridge-type filtration device, so the overall height relative to the bag type dust collectorlower for the customers whose plant is not high enoughto use.
2. The filters using a special form of connection structure, and thus good sealing performance, cleaning, easy toreplace.
3. This equipment is working reliable, high collection efficiency, handling air volume large, it is essential equipment in industrial production is to eliminate pollution, protect the environment, improve working conditions, a recovery of useful materials, it can be widely used in metallurgy, electronics, chemicals, minerals, pigments , pharmaceutical, food, building materials, food processing and other industries.
03
Technical parameter
|
Model Parameters |
LD-1 |
LD-2 |
LD-3 |
LD-5 |
LD-7 |
LD-9 |
|
Filtered area
（m2） |
6 |
12 |
18 |
30 |
42 |
54 |
|
Filter amounts
(indivual) |
1 |
2 |
3 |
5 |
7 |
9 |
|
Filter specification D*L（mm) |
￠325*600 |
￠325*600 |
￠325*600 |
￠325*600 |
￠325*600 |
￠325*600 |
|
Pules amount |
1 |
2 |
3 |
5 |
7 |
9 |
|
Injection pressure
（MPa） |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
|
Air consumption（m3/min） |
0.15 |
0.15-0.3 |
0.2-0.45 |
0.3-0.6 |
0.3-0.75 |
0.3-0.9 |
|
Equipment Resistance（Pa） |
1200-1500 |
1200-1500 |
1200-1500 |
1200-1500 |
1200-1500 |
1200-1500 |
|
Collectionefficiency（%） |
99.5 |
99.5 |
99.5 |
99.5 |
99.5 |
99.5 |
|
Filtration velocity（m/min） |
0.5-2.5 |
0.5-2.5 |
0.5-2.5 |
0.5-2.5 |
0.5-2.5 |
0.5-2.5 |
|
Handle air volume（m3/h） |
180-900 |
360-1800 |
540-2700 |
900-4500 |
1260-6300 |
1620-8100 |
|
Weight（kg） |
80 |
120 |
180 |
300 |
400 |
600 |
|
Dimensions L*B*H （mm） |
¢450*1550 |
¢900*1750 |
¢950*2150 |
¢1200*2450 |
¢1250*2550 |
¢1200*2950 |
Note: You can contact with our sales department if you need some specification of dust which is not in this data.
